Reason for Error code 0x97 on Epson wf-3640 Printer

 

The extensive use of the Epson printer often contributes to the epson error code 0x97. There is no warning of a mistake. Sometimes the printer didn't even turn on because of this error.

The most common cause of this error is the overuse of the printer.

1. Disconnect all devices from the printer -

 

Start by disconnecting the entire device from the Epson printer. Cancel or delete all pending jobs in the print queue. This will get rid of all unnecessary paper jams. Disconnect the cables connected to the printer. 

 

The Epson printer may have been linked to the computer and the Wi-Fi system with wires. Eliminate these wires.

2. Reset Epson Printer -

• Leave the Epson printer on as it takes up to 5 minutes. 
• Then press and hold the power button on the printer for up to 1 minute. 
• Reconnect the wires. 
• And while you plug in the cables, don't move or turn off the power button on your Epson printer.
• Release the button.
• Print a test page to see if the error has been corrected.

3. Install or update the printer driver -

 

The printer driver is an application on the PC or notebook that helps you communicate with the printer. The printer driver translates the computer controls into a language that the printer knows. 

 

This program essentially helps the printer understand the command sent to it from the computer. An outdated printer driver may cause the printer to shut down. The error code is the same as 0x97.

4. Dirty or damaged printhead -

 

The print head of the Epson printer may be dirty. The print head may also be clogged if you have not cleaned it for a long time. If the print head is dirty, you will not assign new jobs to the printer. 

 

Due to the simple fact that a dirty print head cannot process any advice in the first location.

5. Damaged or loose cables -

 

The cables connecting the Epson printer to an electrical outlet or another device may be damaged or loose. These wires cause many difficulties, and Epson wf-3640 Error Code 0x97 is just one of them. A flexible cable can prevent the printer from gaining any control from the computer and thus an error.

6. Print queue -

 

If you have jobs waiting in the print queue, you may encounter the Epson wf-3640 0x97 error code. Just like a printer, any overworked machine will behave from time to time. Putting a load on the printer will make it unresponsive to orders and continue to perform its everyday tasks.

How to fix Epson wf-3640 with error code 0x97

You can fix Epson wf-3640 error 0x97 in different ways. We recommend that you find out why you want your printer to work.

1. Update the printer driver -

 

A printer driver is a critical software that acts as a means of communication between the printer and computer. If you ever encounter Epson wf-3640 error 0x97 or any other error, make sure you have checked that you have the latest version of the printer driver on your computer. 

 

Go to the Epson website, enter the version number of your printer, and check for updates to the printer driver. Install and update it accordingly.

2. Clean the print head -

 

Eliminate any toner or ink cartridge in the print head. Place the cartridges carefully on a soft cloth. Now take the print head for your Epson printer carefully.

Clean the print head base with a damp cloth. Continue wiping the nozzle until you see it is entirely ink-free.

You can even submerge the print head in warm water. Keep the print head in clean water for at least 10 minutes. Take it out and put it upside down on some cloth. Could you wait for the printhead to dry by itself? Please clean it later as well.

Put the print head back out of the printer. And put the capsules in the right places. Turn on the printer and check if the Epson wf-3640 0x97 error code is gone.

3. Reconnect all devices to the printer -

 

As mentioned above, you need to disconnect all cables and devices from the printer at several of these points. Also, remove the cartridges or ink. As soon as you eliminate the capsules, also remove the printhead. 

 

If necessary, clean the print head. Reconnect all cables. Turn on the power button, and then press and hold the "Power" button on your Epson printer for at least 1 minute.

Simple as these approaches seem to be successful in fixing Epson wf-3640 with error code 0x97. Before you begin performing these repairs, make sure you understand where the error is coming from. 

 

This may allow the process to be recognized more easily. You can also contact Epson by joining the printer installation utility group for help.